10
2.2.11 Safety Warning Signs
During transport, installation, maintenance and troubleshooting of the PCS, keep non-re-
lated persons away.
• Post warning signs near the PCS upstream and downstream switches to prevent acci-
dental connection.
• Place necessary warning signs or barriers near the on-site operation areas.
2.2.12 Maintenance and Service
Wait at least 5 minutes after the PCS stops and then open the PCS front door to
maintain or service.
Before any service work, observe the followings.
• Ensure that the PCS will not be started accidentally.
• Verify that the PCS interior is discharged completely with a multimeter.
• Carry out necessary ground connection and short circuit connection.
• Cover the adjacent electrical components with insulation cloth during operation.
• Ensure the clearness of the safety route during maintenance and service work.
2.2.13 Disposal of Waste
When the PCS or any internal device is end of life, it cannot be disposed of together with
household wastes. Some components inside can be recycled and some components may
cause environment pollution.
Please contact local authorized recycling agency.
2.2.14 Manual Description
For easy understanding, there are a large number of pictures in this manual.
These pictures are for reference only. For details about the device, please refer to
the actual product you receive.
Keep this manual at a place near the device for future reference during installation,
operation, maintenance and troubleshooting of the device.
All the descriptions in this manual are for the standard PCS. Please inform us in
the purchase order if there is any specific requirements. The actual product re-
ceived may differ.
This manual may not cover all possible situations. Should a specific problem occur
that is not explained in this manual, please contact SUNGROW.
2 Safety Instructions System Manual
To Next Page
Loading...
Need help?
General