53
7
Commissioning
7.1 Safety Instructions
High voltage! Electric shock!
• Wear proper protection equipment before all operations on the device.
• Do not touch the live terminals or conductors.
• Respect all safety instructions inside the device and in this manual.
• Respect all safety instructions prescribed by the manufacturer of devices con-
nected to the PCS.
Grid-connection of the PCS can be done only with approval from the local utility
grid company and by qualified personnel.
Make sure there are no flammable materials at least 5 meters around a running
PCS.
Local/national standards about the min. electric clearance around the PCS should
be respected.
Make sure the installation is correct and no spare parts or tools are left inside the
device.
Close the doors of the PCS and the internal devices if the commissioning is
stopped.
7.2 Commissioning Requirements
Before commissioning, thoroughly inspect the DC cabinet and two power modules inside the
PCS for correct and secure installation.
To Next Page
Loading...
Need help?
General