Sungrow SC5000UD-MV-US System Manual

36
figure 6-4 Copper-aluminum composite terminal of double-hole cable connection
Select a cable connection method based on actual needs.
When the busbar has several connection terminals, an intact copper-aluminum composite
sheet is required as shown in the following figure.
figure 6-5 Copper-aluminum composite sheet connection sequence
*The figure above is indicative only.
1 2 3
PCS copper bar Copper-aluminum compo-
site sheet
Terminal
6.3 Preparation Before Electrical Connections
6.3.1 Installation Tools
Prepare the following tools before installation:
• Torque wrench
• Screwdriver
• Wire stripper
• Terminal crimping device
• Alcohol blast burner (or hot air blower)
• Allen wrench
6 Electrical Connection System Manual

Sungrow SC5000UD-MV-US Specifications

General

Brand	Sungrow
Model	SC5000UD-MV-US
Category	Storage
Language	English