25
figure 5-1 Hoisting the PCS
5.2.2 Fastening of Connectors
Use slings with hooks or U-hooks to hoist the PCS.
The lifting devices should be connected correctly to the PCS.
Lifting device
Hook U-hook
Connections
Notice
Insert the hook from inside to
outside.
Tighten the lateral pin of the U-
hook.
• National and local safety rules should be observed at all times.
• Regardless of relevant safety rules may void pertinent warranty claims from
SUNGROW.
5.2.3 Hoisting
In the whole hoisting process, please observe the following rules:
System Manual 5 Mechanical Mounting