Sungrow SG8K3-D - Page 14

2 Product Introduction User Manual
6
2
3
4
5
61
7
8
Fig. 2-2 Inverter Appearance (SG5K-D for reference)
Item
Name
Description
1 PV terminals
Positive and negative DC input connectors.
One or two or three pairs, depending on inverter type.
2
DC switch
To disconnect the DC current safely.
3
RS485
terminal
Can be connected to Wi-Fi communication module.
4
Meter | DRM
terminal
Left connector is intended for energy meter, right
connector is reserved.
5
Second PE
terminal
For reliable grounding.
6
AC terminal
To feed power into the utility grid.
7 LCD panel
The display and two buttons can be used to access
current operating data or change inverter settings.
8
Mounting rack
For mounting the inverter to the wall mounting bracket.