The single-phase Energy Meter and the three-phase Energy Meter are optional.
The meter figures in this document have been created for the single-phase
Energy Meter unless otherwise specified.
3.4 Storage of Inverter
If you do not install the inverter immediately, choose an appropriate location to
store it.
Store the inverter in the original packaging with the desiccant inside.
The storage temperature should be always between -30°C and +85°C, and
the storage relative humidity should be always between 0 and 100 %,
non-condensing.
When storing inverters, do not stack more than 8 inverter packages on top of
each other.
The packaging should be upright.
If the inverter has been stored more than half a year, the qualified personnel
should thoroughly check and test it before using.
To Next Page
