SWL2820 Operator’s Manual
14
Before leave machine, carry out the following procedures in the sequence.
1) Park the machine in a safe position.
2) Lower the working equipment to the ground.
3) Engage the parking brake.
4) Engage the auxiliary equipment control pedal retainer.
5) Raise the restrain bar to upward.
6) Stop the engine.
2.3.4 PREVENTION OF FIRE TO FUEL AND OIL
Fuel and oil are easily to cause fire if they meet flame.
Keep always flame away from the fuel and oil.
Stop the engine and never smoke during refueling.
Only do the refilling fuel and oil in the well ventilated areas.
Close well the safety cap after refilling oil or fuel.
Do not fill the tanks in order to leave room for the fuel expansion.
If some fuel or oil is spilled wipe it up
immediately.
2.3.5 PREVENTION OF BURNS
After operating for a period, the engine, coolant,
hydraulic oil, engine oil, radiator and pumps are
hot. Do not touch them until they cool down.
In case of entailing working with hot oil, hot
coolant or hot hydraulic oil, wear gloves, heavy
clothing and safety goggles before do any check
or maintenance.
To Next Page
