SWL2820 Operator’s Manual
29
3.3.3 ENGINE IDENTIFICATION PLATE
The engine identification plate is placed on the engine as show in the below picture.
3.3.4 SERIAL NUMBER OF CHASSIS
The serial number of the chassis is placed as showed in the below picture.
3.4 SECURITY DEVICES
3.4.1 RESTRAIN BAR
The restrain bar in made of steel and wrapped with a special rubber. At the end of the
restrain bar there is a sensor. The sensor will detect the position of the restrain bar. When
the restrain bar is raised the working equipment and travel will be blocked.