SUNWARD SWL2820 - General Description of the SWL2820 Loader; Machine Description Overview

SWL2820 Operator’s Manual
22
 Always tighten the terminals and caps securely.
Loosen terminals or caps may cause fire and
explosion.
 Do not let tools other metal objects make any
contact between battery terminal.
 Disconnect first the negative earth cable (-) and
then the other positive cable (+).When connecting,
connect fist the positive cable (+) and then the
negative earth cable (-).
 If there is a welding operating on the machine, please disconnect the battery cables
before it.
2.5.7 PRECAUTION DURING INFLATING THE
TIRES
 Take into consideration that tires can burst while
being inflating. Inflate the tires bit by bit.
 For inflating the tires use an air-compressing gun
with extension and a gauge for control the
pressure in the tire.
 Do the maintenance of the tires like described in the relating item of this manual.
 Do not stand very close to the tire during inflating the tire and make sure that nobody
stands close.
 Follow the recommendation for the pressure given in the related item of this manual.
Make sure that the tire pressure is the same on both sides of the machine.
DISCONNECT