SUNWARD SWL2820 - Machine Maintenance and Servicing; Required Service and Maintenance Schedule; General Advice for Maintenance Procedures

SWL2820 Operator’s Manual
57
4.21.3 AFTER THE PERIOD OF INACTIVITY
After a long time of inactivity, proceed as follow:
 Clean the machine deeply.
 Release the exhaust pipe.
 Check all the fluids level of the machine.
 Install the battery and make sure it is charged.
 Turn the key to position “Preheat” (See item 4.2 Starting the Machine) and check
if the entire indicators are working properly (Indicator for the fuel level, Indicator
for the oil pressure, Battery Warning Light, Preheating Light). Maintain the key
in this position until the preheating light goes out.
 Start the engine and leave it at idle speed during 15 minutes.
 Make sure all the function of the machine work properly.
 Begin slowly to move the machine for warming up the hydraulic oil.