Sunways NT 2500 - Page 66

6 System monitoring
66
10. First click the «Networking» tab and select
«Internet Protocol (TCP/IP)».
Select «Properties».
11. Enter the following data:
Obtain an IP address automatically
Obtain DNS server address automatically
12. Enter «customer» as the user name and the
standard password (******** = 8 times star key)
or the password you entered previously.
The password matches the customer password on
the device.
13. Click «Dial» to establish the connection. After
the connection is established you can start the
Sunways Browser by entering the IP address of
the Solar Inverter in the address line of your web
browser.
In contrast to the normal IP address for a modem
connection the IP address of the Solar Inverter is set
to 192.168.20.50 by default.