Supco VLTS User Manual

Temperature recorder and printer 15
can be opened in Notepad or Excel, which will automatically sort out the data in columns,
or the data may be sorted into columns upon the file opening, such as:
To get these columns in Excel:
Copy to: VLTS has 3 ways of copying the data, as follows:
▲ SD-Card – to copy the data to a micro-SD card, scroll with / until you reach
Copy to SD Card and press . The prompt Please wait, copy to SD card will
appear on the display. After the copying, the prompt All data saved to SD Card will
be displayed and printed. If the copying fails, the notification Error while coping to
SD card will be displayed and printed.
▲ USB Memory – to copy the data to a USB stick device, scroll with / until you
reach Copy to USB memory and press . The prompt Please wait, copy to
USB memory will appear on the display. After the copying, the prompt All data
saved to USB memory will be displayed and printed. If the copying fails, the
notification Error while coping to USB memory will be displayed and printed.
▲ Server – copying data to an Internet server or portal is only possible in the VLTSC
model with an active micro-SIM card installed. Using / , select Copy to Server
and press. . The prompt Please wait, copying to Server will appear on the
display. After the copying, the prompt All data saved to Server will be displayed and
printed. If the copying fails, the notification Error while coping to Server will be
displayed and printed.
▲ Note: when there is no card or when copying fails, the prompt Error while copying
will be displayed. If the printer is active, the operation notes displayed will also be
printed. It is recommended to use memory devices of up to 16 GB.
ALARM INDICATORS
A VLTS/VLTSC device has 3 alarm indicators, and a VLTSC device can also be set for
notification by SMS and by email through the portal. In each of the alarm events set – Alarm
- YES – the following indicators will always be activated automatically: the alarm relay
contacts will close, the ALARM light will come on and a notification will be displayed.
To delete an alert notification, press to confirm (does not deactivate the alarm
contact).
To mute the alarm buzzer, Press (does not deactivate the alarm contact).
For “ Setting Alarm Limits to Sensor ” see page 21.
For “ Setting up Additional Alarm Events ” see page 22 .

Supco VLTS Specifications

General

Brand	Supco
Model	VLTS
Category	Measuring Instruments
Language	English