Supco VLTS User Manual

Temperature recorder and printer 35
APPENDIX A DEFAULT SETTINGS
To reset setting to factory defaults, do the following:
1. Turn off the device, disconnect the backup battery and the power supply.
2. Hold down and connect the power supply.
3. After about 6 seconds, the display will turn on. Release .
4. All the menu settings will revert to the factory settings and the readings will be
displayed.
Note: Restoring defaults does not delete records.
Recommended: print and save the Print, Spec & Programming settings report after
every change in the settings. See “Printing on-Demand reports”, page 14.
Table 6 lists the VLTS default settings.
Table 6: Default settings
GENERAL DEVICE SETTINGS
Real-time printing
[See page 11]
Sampling Rate
[See page 26]
Daily min/max print
[See page 24]
Min/max print time
[See page 24]
No
15 Min.
Yes
08:00
Unit Name
13 characters
[See page 25]
Vehicle/ Object Name
13 characters
[see page 25]
Company Name
13 characters
[See page 25]
Password (default)
4-character string
from left to right
[See page 25]
Instrument123
Office1
SUPCO
Fahrenheit/ Celsius
[See page 24]
Date Format
[See page 24]
Overwrite SD/USB
[See page 26]
Sensor Error Alarm
[See page 22]
Celsius
dd/mm/yyyy
Yes
Yes
Buzzer enabled:
Yes
Internal buzzer activation
General alarm events [page 22]
Clock Bat.
Hot ambient 65
0
C
No paper
USB full
Yes
Yes
No
No
Backup bat.
Copy prog
No Power
SD full
Yes
Yes
No
No

Supco VLTS Specifications

General

Brand	Supco
Model	VLTS
Category	Measuring Instruments
Language	English