A+ Server AS -2123BT-Hxxx User's Manual
60
Chapter 6
BIOS
6.1 Introduction
This chapter describes the AMI BIOS setup utility for the H11DST-B and provides instructions
for navigating the setup screens. The BIOS is stored on a chip and can be easily upgraded
Note: Due to periodic changes to the BIOS, some settings may have been added or deleted
since this manual was published.
Starting BIOS Setup Utility
To enter the BIOS setup utility screens, press the <Delete> key while the system is booting
up. (There are a few cases when other keys are used, such as <F1>, <F2>, etc.)
The BIOS screens have three main frames. The large left frame displays options can be
Settings printed in Bold are the default values.
In the left frame, a " " indicates a submenu. Highlighting such an item and pressing the
<Enter> key opens the list of settings in that submenu.
The upper right frame displays helpful information for the user. The BIOS has default
informational messages built in. The manufacturer retains the option to include, omit, or
change any of these informational messages.
The lower right frame lists navigational methods. The AMI BIOS setup utility uses a key-based
navigation system called hot keys. Most of these hot keys can be used at any time during
setup navigation. These keys include <F3>, <F4>, <Enter>, <ESC>, arrow keys, etc.
Some system parameters may be changed.
To Next Page
Loading...
