Chapter 5: Running Setup
5-21
When you select Supervisor or User, AMIBIOS prompts for a password.
You must set the Supervisor password before you can set the User
password. Enter a 1-6 character password. The password does not
appear on the screen when typed. Retype the new password as
prompted and press <Enter>. Make sure you write it down. If you forget
it, you must drain CMOS RAM and reconfigure.
5-3 Utility Setup
5-3-1 Anti-Virus
When this icon is selected, AMIBIOS issues a warning when any program
(or virus) issues a disk format command or attempts to write to the boot
sector of the hard disk drive. The settings are
Enabled
or
Disabled
.
5-3-2 Language
Note: The Optimal and Fail-Safe default settings for this option
are both
English.
5-4 Default Setting
Every option in WinBIOS Setup contains two default settings: a Fail-Safe
default, and an Optimal default.
5-4-1 Optimal Default
The Optimal default settings provide optimum performance settings for all
devices and system features.
5-4-2 Fail-Safe Default
The Fail-Safe default settings consist of the safest set of parameters. Use
them if the system is behaving erratically. They should always work but do
not provide optimal system performance characteristics.
To Next Page
Loading...
