Supermicro SUPER P6DBE - Peripheral Setup

BIOS Manual
5-18
Reserved Memory Size
This option specifies the size of the memory area reserved for legacy ISA
adapter cards. The settings are Disabled , 16K , 32K or 64K .
Reserved Memory Address
This option specifies the beginning address (in hex) of the reserved memory
area. The specified ROM memory area is reserved for use by legacy ISA
adapter cards. The settings are C0000 , C4000 , C8000 , CC000 , D0000 ,
D4000 , D8000 or DC000 .
Default Primary Video
This feature supports multiple displays. The settings are AGP or PCI .
5-1-6 Peripheral Setup
On-board SCSI
The settings for this option are Enabled or Disabled . When set to Enable
this option enables the Adaptec 7895 BIOS on the P6DBS/P6SBS
motherboards or the Adaptec 7890 on the P6DBU/P6SBU motherboards.
Remote Power On
Microsoft's Memphis OS supports this feature which can wake-up the system
from SoftOff state through devices (such as an external modem) that are
connected to COM1 or COM2. The settings are Disabled or Enabled .
CPU Current Temperature
The current CPU temperature is displayed in this option.
CPU Overheat Warning
The settings for this option are Enabled or Disabled . When set to Enabled
this option allows the user to set an overheat warning temperature.
CPU Overheat Warning Temperature
Use this option to set the CPU overheat warning temperature. The settings
are 25 °C through 75 °C in 1 °C intervals . Note: The Optimal and Fail-Safe
default settings are 55 °C .
H/W Monitor In0 (CPU 1)
H/W Monitor In1 (CPU 2)
H/W Monitor In2 (+3.3V)
H/W Monitor In3 (+5V)
H/W Monitor In4 (+12V)
H/W Monitor In5 (-12V)