Chapter 6: BIOS
59
Turbo Mode
manufacturer. The options are Disable and Enable.
Package Power Limit MSR Lock
are Disabled and Enabled.
Power Limit 1 Override
Select Enabled to support average power limit (PL1) override. The options are Disabled and
Enabled.
Power Limit 1
step size is 125mW. Use the number keys on your keyboard to enter the value. Enter 0 to
use the manufacture default setting. If the value is 0, the BIOS will set PL1 as 1.25* TDP.
This feature is hidden when Power Limit 1 Override is Disabled.
Power Limit 2 Override
Select Enabled to support rapid power limit (PL2) override. The options are Disabled and
Enabled.
Power Limit 2
step size is 125mW. Use the number keys on your keyboard to enter the value. Enter 0 to
use the manufacture default setting. If the value is 0, the BIOS will set PL2 as 1.25* TDP.
1-Core Ratio Limit Override
This increases (multiplies) one clock speed in the CPU core in relation to the bus speed
when one CPU core is active. Press "+" or "-" on your keyboard to change the value. The
default value is 0.
2-Core Ratio Limit Override
This increases (multiplies) two clock speeds in the CPU core in relation to the bus speed
when two CPU cores are active. Press "+" or "-" on your keyboard to change the value.The
default value is 0.
3-Core Ratio Limit Override
This increases (multiplies) three clock speeds in the CPU core in relation to the bus speed
when three CPU cores are active. Press "+" or "-" on your keyboard to change the value.
The default value is 0.
To Next Page
Loading...
Need help?
General
