SuperServer1019C-HTN2 User's Manual
60
4-Core Ratio Limit Override
This increases (multiplies) four clock speeds in the CPU core in relation to the bus speed
when four CPU cores are active. Press "+" or "-" on your keyboard to change the value. The
default value is 0.
5-Core Ratio Limit Override (-F)
default value is 0.
6-Core Ratio Limit Override(-F)
This increases (multiplies) six clock speeds in the CPU core in relation to the bus speed
when six CPU cores are active. Press "+" or "-" on your keyboard to change the value. The
default value is 0.
C states
Use this feature to enable the C-State of the CPU. The options are Disabled and Enabled.
Enhanced C-states
Use this feature to enable the enhanced C-State of the CPU. The options are Disabled and
Enabled.
C-State Auto Demotion
Use this feature to prevent unnecessary excursions into the C-states to improve latency. The
options are Disabled, C1, C3, and C1 and C3.
C-State Un-demotion
This feature allows the user to enable or disable the un-demotion of C-State. The options are
Disabled, C1, C3, and C1 and C3
Package C-State Demotion
Use this feature to enable or disable the Package C-State demotion. The options are Disabled
and Enabled.
Package C-State Un-demotion
Use this feature to enable or disable the Package C-State un-demotion. The options are
Disabled and Enabled.
CState Pre-Wake
This feature allows the user to enable or disable the C-State Pre-Wake. The options are
Disabled and Enabled.
Package C State Limit
Use this feature to set the Package C-State limit. The options are C0/C1, C2, C3, C6, C7,
C7s, C8, C9, C10, Cpu Default, and Auto.
To Next Page
Loading...
Need help?
General
