Supermicro SuperServer 1019C-HTN2 - Page 61

Chapter 6: BIOS
61
ChipsetConguration
Warning: Setting the wrong values in the sections below may cause the system to malfunction.
SystemAgent(SA)Conguration
The following information will display:
• SA PCIe Code Version: 7.0.53.66
• VT-d: Supported
MemoryConguration
MemoryConguration
• Memory RC Version
• Memory Frequency
• Memory Timing (tCL-tRCD-tRP-tRAS)
• DIMMA1
• DIMMA2
• DIMMB1
• DIMMB2
Maximum Memory Frequency
Use this feature to set the maximum memory frequency for onboard memory modules.
The options are Auto, 1067, 1333, 1400, 1600, 1800, 1867, 2000, 2133, 2200, 2400,
2600, and 2667.
ECC Support
Use this feature to enable or disable memory ECC support. The options are Disable and
Enable.
Max TOLUD

DRAM" memory space to be used by internal graphics devices, GTT Stolen Memory, and
TSEG, respectively, if these devices are enabled. The options are Dynamic, 1 GB, 1.25
GB, 1.5 GB, 1.75 GB, 2 GB, 2.25 GB, 2.5 GB, 2.75 GB, 3 GB, 3.25 GB, and 3.5 GB.