SuperServer1019C-HTN2 User's Manual
68
Device Settings
Change Settings
Auto to allow the BIOS to automatically assign the
base I/O and IRQ address. The options are Auto, (IO=2F8h; IRQ=3;), (IO=3F8h; IRQ=3,
4, 5, 6, 7, 9, 10, 11, 12;), (IO=2F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;), (IO=3E8h; IRQ=3,
4, 5, 6, 7, 9, 10, 11, 12;), and (IO=2E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;).
SerialPort3Conguration
Serial Port 3
Select Enabled to enable the selected onboard serial port. The options are Disabled and
Enabled.
Device Settings
Change Settings
Auto to allow the BIOS to automatically assign the
base I/O and IRQ address. The options are Auto, (IO=3E8h; IRQ=7;), (IO=3E8h; IRQ=3,
4, 5, 6, 7, 9, 10, 11, 12;), (IO=2E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;), (IO=2F0h; IRQ=3,
4, 5, 6, 7, 9, 10, 11, 12;), and (IO=2E0h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;).
SerialPort4Conguration
Serial Port 4
Select Enabled to enable the selected onboard serial port. The options are Disabled and
Enabled.
Device Settings
Change Settings
Auto to allow the BIOS to automatically assign the
base I/O and IRQ address. The options are Auto, (IO=2E8h; IRQ=7;), (IO=3E8h; IRQ=3,
4, 5, 6, 7, 9, 10, 11, 12;), (IO=2E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;), (IO=2F0h; IRQ=3,
4, 5, 6, 7, 9, 10, 11, 12;), and (IO=2E0h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;).
To Next Page
Loading...
