Chapter 6: BIOS
69
AST2500SECSuperIOConguration
AST2500SECSuperIOConguration
Super IO Chip AST 2500SEC
SerialPort2Conguration
Serial Port
Select Enabled to enable the selected onboard serial port. The options are Disabled and
Enabled.
Device Settings
Change Settings
Auto to allow the BIOS to automatically assign the
base I/O and IRQ address. The options are Auto, (IO=248h; IRQ=10;), (IO=240h; IRQ=3,
4, 5, 6, 7, 10, 11, 12;), (IO=248h; IRQ=3, 4, 5, 6, 7, 10, 11, 12;), (IO=250h; IRQ=3, 4, 5, 6,
7, 10, 11, 12;), (IO=258h; IRQ=3, 4, 5, 6, 7, 10, 11, 12;), (IO=260h; IRQ=3, 4, 5, 6, 7, 10,
11, 12;), and (IO=268h; IRQ=3, 4, 5, 6, 7, 10, 11, 12;) .
COM Attribute
Use this feature to select the COM2 mode. The options are SOL and COM.
Serial Port Console Redirection
COM1/COM2/COM3/COM4
Console Redirection
Select Enabled to enable COM ports 1-4 for Console Redirection, which will allow a client
machine to be connected to a host machine at a remote site for networking. The options are
Disabled and Enabled.
*If the feature above is set to Enabled, the following features will become available for
conguration:
To Next Page
Loading...
Need help?
General
