Chapter 6: BIOS
83
Http Boot One Time
Use this feature to create the HTTP boot option. The options are Disabled and Enable.
Input the desrciption
Highlight the feature and press enter to create a description.
Boot URI
Highlight the feature and press enter to create a boot URI.
Trusted Computing
*The features in the Trusted Computing section on this page are displayed if a TPM
1.2 module is detected:
Conguration
Security Device Support
security devices will be enabled for TPM support to enhance data integrity and network
are Disable and Enable.
TPM State
Select Enabled to use TPM (Trusted Platform Module) settings to enhance system data
options are Disabled and Enabled.
Pending Operation
Use this feature to schedule a TPM-related operation to be performed by a security device
for system data integrity. Your system will reboot to carry out a pending TPM operation. The
options are None and TPM Clear.
Note: Your system will reboot to carry out a pending TPM operation.
Device Select
Use this feature to select the TPM version. TPM 1.2 will restrict support to TPM 1.2 devices.
TPM 2.0 will restrict support for TPM 2.0 devices. Select Auto to enable support for both
versions. The default setting is Auto.
Current Status Information
This feature displays the status of the TPM support on this motherboard.
• TPM Enabled Status
To Next Page
Loading...
