SuperStorage Server 2028R-NR48N
6-10
Installing a SIOM Card
1. Power down the system as described in Section 6-2.
2. Remove the small section of the chassis rear to allow access to the motherboard
SIOM slot. Unscrew the single retaining screw to remove the cover.
Figure 6-11. SIOM Card Position on Chassis Rear
3. Position the card with its cover bracket in front of the SIOM slot and gently push
in both sides of the card until it slides into the slot.
4. Secure the SIOM card cover bracket to the chassis with the screw.
SIOM card with the
bracket installed
Insert the SIOM card
into this slot
Figure 6-12. Inserting SIOM Card
Cover Retaining Screw
To Next Page
Loading...
