EasyManuals Logo

Supermicro X11DPL-i User Manual

Supermicro X11DPL-i
127 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #107 background imageLoading...
Page #107 background image
Chapter 4: UEFI BIOS
107
When SEL is Full
This feature allows the user to decide what the BIOS should do when the system event
log is full. Select Erase Immediately to erase all events in the log when the system event
log is full. The options are Do Nothing and Erase Immediately.
Note: All values changed here do not take effect until computer is restarted.
BMC Network Conguration
BMC Network Conguration
Update IPMI LAN Conguration
Select Yes for the BIOS to implement all IP/MAC address changes at the next system boot.
The options are No and Yes.
Congure IPV4 support
IPMI LAN Selection
This feature displays the IPMI LAN setting. The default setting is Failover.
IPMI Network Link Status
This feature displays the IPMI Network Link status. The default setting is Dedicated LAN.
*If the feature above is set to Yes, the following feature will become available for user's
conguration:
Conguration Address Source
This feature allows the user to select the source of the IP address for this computer. If Static
is selected, you will need to know the IP address of this computer and enter it to the system
manually in the eld. If DHCP is selected, the BIOS will search for a DHCP (Dynamic Host
Conguration Protocol) server in the network that is attached to and request the next available
IP address for this computer. The options are DHCP and Static.
Station IP Address
This feature displays the Station IP address for this computer. This should be in decimal and
in dotted quad form (i.e.,10.135.174.29).
Subnet Mask
This feature displays the sub-network that this computer belongs to. The value of each three-
digit number separated by dots should not exceed 255.
Station MAC Address
This feature displays the Station MAC address for this computer. Mac addresses are 6 two-
digit hexadecimal numbers.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Supermicro X11DPL-i and is the answer not in the manual?

Supermicro X11DPL-i Specifications

General IconGeneral
USB 2.0 ports quantity4
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity3
Supported DIMM module capacities64GB, 128MB
Memory voltage1.2 V
Supported memory typesDDR4-SDRAM
Maximum internal memory128 GB
Supported memory clock speeds2133, 2400, 2666 MHz
RAID levels0, 1, 5, 10
Wi-FiNo
Ethernet LANYes
Ethernet interface typeGigabit Ethernet
System bus rate10.4 GT/s
Processor manufacturerIntel
Processor thermal power (max)140 W
PCI Express x16 (Gen 3.x) slots2
BIOS typeUEFI AMI
Motherboard chipsetIntel® C621
Motherboard form factorATX
Harmonized System (HS) code84733020
Weight and Dimensions IconWeight and Dimensions
Depth257.8 mm
Width306.7 mm

Related product manuals