EasyManuals Logo

Supermicro X11DPL-i User Manual

Supermicro X11DPL-i
127 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #67 background imageLoading...
Page #67 background image
Chapter 3: Troubleshooting
67
3.3 Frequently Asked Questions
Question: What type of memory does my motherboard support?
Answer: The X11DPL-i motherboard supports up to 2TB of 3DS LRDIMM/LRDIMM/RDIMM/
NV-DIMM DDR4 ECC 2933/2666/2400/2133 MHz memory in 8 memory slots. See Section
2.4 for details on installing memory.
Note: 2933 MHz memory is supported by 2nd Gen Intel Xeon Scalable-SP (82xx/62xx
series) processors only.
Question: How do I update my BIOS?
Answer: It is recommended that you do not upgrade your BIOS if you are not experiencing
any problems with your system. Updated BIOS les are located on our website at http://www.
supermicro.com. Please check our BIOS warning message and the information on how to
update your BIOS on our website. Select your motherboard model and download the BIOS
le to your computer. Also, check the current BIOS revision to make sure that it is newer
than your BIOS before downloading. You can choose from the zip le and the .exe le. If
you choose the zip BIOS le, please unzip the BIOS le onto a bootable USB device. Run
the batch le using the format FLASH.BAT lename.rom from your bootable USB device to
ash the BIOS. Then, your system will automatically reboot.
Question: Why can't I turn off the power using the momentary power on/off switch?
Answer: The instant power off function is controlled in BIOS by the Power Button Mode
setting. When the On/Off feature is enabled, the motherboard will have instant off capabilities
as long as the BIOS has control of the system. When the Standby or Suspend feature is
enabled or when the BIOS is not in control such as during memory count (the rst screen
that appears when the system is turned on), the momentary on/off switch must be held for
more than four seconds to shut down the system. This feature is required to implement the
ACPI features on the motherboard.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Supermicro X11DPL-i and is the answer not in the manual?

Supermicro X11DPL-i Specifications

General IconGeneral
USB 2.0 ports quantity4
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity3
Supported DIMM module capacities64GB, 128MB
Memory voltage1.2 V
Supported memory typesDDR4-SDRAM
Maximum internal memory128 GB
Supported memory clock speeds2133, 2400, 2666 MHz
RAID levels0, 1, 5, 10
Wi-FiNo
Ethernet LANYes
Ethernet interface typeGigabit Ethernet
System bus rate10.4 GT/s
Processor manufacturerIntel
Processor thermal power (max)140 W
PCI Express x16 (Gen 3.x) slots2
BIOS typeUEFI AMI
Motherboard chipsetIntel® C621
Motherboard form factorATX
Harmonized System (HS) code84733020
Weight and Dimensions IconWeight and Dimensions
Depth257.8 mm
Width306.7 mm

Related product manuals