Supermicro X11DPL-i User Manual

Chapter 4: UEFI BIOS
111
Secure Boot Variable/Size/Keys/Key Source
Platform Key (PK)
This feature allows the user to enter and congure a set of values to be used as platform
rmware keys for the system. The sizes, keys numbers, and key sources of the platform
keys will be indicated as well. Select Update to update the platform key.
Key Exchange Keys
This feature allows the user to enter and congure a set of values to be used as Key-
Exchange-Keys for the system. The sizes, keys numbers, and key sources of the Key-
Exchange-Keys will be indicated as well. Select Update to update your "Key Exchange
Keys". Select Append to append your "Key Exchange Keys".
Authorized Signatures
This feature allows the user to enter and congure a set of values to be used as Autho-
rized Signatures for the system. These values also indicate the sizes, keys numbers,
and the sources of the authorized signatures. Select Update to update your "Authorized
Signatures". Select Append to append your "Authorized Signatures". The settings are
Details, Export, Update, Append, and Delete.
Forbidden Signatures
This feature allows the user to enter and congure a set of values to be used as Forbid-
den Signatures for the system. These values also indicate sizes, keys numbers, and key
sources of the forbidden signatures. Select Update to update your "Forbidden Signa-
tures". Select Append to append your "Forbidden Signatures". The settings are Details,
Export, Update, Append, and Delete.
Authorized TimeStamps
This feature allows the user to set and save the timestamps for the authorized signatures
which will indicate the time when these signatures are entered into the system. Select
Update to update your "Authorized TimeStamps". Select Append to append your "Au-
thorized TimeStamps". The settings are Update and Append.
Os Recovery Signatures
This feature allows the user to set and save the authorized signatures used for OS recov-
ery. Select Update to update your "OS Recovery Signatures". Select Append to append
your "OS Recovery Signatures". The settings are Update and Append.

Supermicro X11DPL-i Specifications

General

USB 2.0 ports quantity	4
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	3
Supported DIMM module capacities	64GB, 128MB
Memory voltage	1.2 V
Supported memory types	DDR4-SDRAM
Maximum internal memory	128 GB
Supported memory clock speeds	2133, 2400, 2666 MHz
RAID levels	0, 1, 5, 10
Wi-Fi	No
Ethernet LAN	Yes
Ethernet interface type	Gigabit Ethernet
System bus rate	10.4 GT/s
Processor manufacturer	Intel
Processor thermal power (max)	140 W
PCI Express x16 (Gen 3.x) slots	2
BIOS type	UEFI AMI
Motherboard chipset	Intel® C621
Motherboard form factor	ATX
Harmonized System (HS) code	84733020

Weight and Dimensions

Depth	257.8 mm
Width	306.7 mm