Supermicro X11DPL-i User Manual

Chapter 4: UEFI BIOS
113
When the item above -"Boot Mode Select" is set to Legacy, the following items will be
displayed for conguration:
• Boot Option #1 - Boot Option #8
When the item above -"Boot Mode Select" is set to UEFI, the following items will be displayed
for conguration:
• Boot Option #1 - Boot Option #9
Delete Boot Option
Use this feature to select a boot device to delete from the boot priority list.
Delete Boot Option
Use this feature to remove an EFI boot option from the boot priority list.
UEFI Application Boot Priorities
This feature allows the user to specify which UEFI devices are boot devices.
Boot Option #1
The options are UEFI: Built-in EFI Shell and Disabled.
NETWORK Drive BBS Priorities
This feature allows the user to specify which UEFI network drive devices are boot devices.
Boot Option #1
The options are IBA 40-10G Slot 6000 v1060 and Disabled.

Supermicro X11DPL-i Specifications

General

USB 2.0 ports quantity	4
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	3
Supported DIMM module capacities	64GB, 128MB
Memory voltage	1.2 V
Supported memory types	DDR4-SDRAM
Maximum internal memory	128 GB
Supported memory clock speeds	2133, 2400, 2666 MHz
RAID levels	0, 1, 5, 10
Wi-Fi	No
Ethernet LAN	Yes
Ethernet interface type	Gigabit Ethernet
System bus rate	10.4 GT/s
Processor manufacturer	Intel
Processor thermal power (max)	140 W
PCI Express x16 (Gen 3.x) slots	2
BIOS type	UEFI AMI
Motherboard chipset	Intel® C621
Motherboard form factor	ATX
Harmonized System (HS) code	84733020

Weight and Dimensions

Depth	257.8 mm
Width	306.7 mm