X11DPL-i User Manual
126
6. After the BIOS recovery process is completed, press any key to reboot the system.
7. Using a different system, extract the BIOS package into a USB ash drive.
8. Press <Del> during system boot to enter the BIOS setup utility. From the top of the tool
bar, click on Boot and press <Enter> to enter the submenu. From the submenu list,
select Boot Option #1 as shown below. Then, boot Option #1 to [UEFI AP:UEFI: Built-in
EFI Shell]. Press <F4> to save the settings and exit the BIOS setup utility.
To Next Page
Loading...
