15
Chapter 1: Introduction
Note: The table above is continued on the next page.
Motherboard Features
BIOS
• 256Mb AMI BIOS SPI Flash ROM
• ACPI 6.0 or later, SPI dual/quad speed support, and SMBIOS 3.1.1 or later
• Riser Card auto detection support
Power Management
• ACPI power management
• Power button override mechanism
• Power-on mode for AC power recovery
• Intel® Intelligent Power Node Manager 3.0 (available when the Supermicro Power Manager [SPM] is installed and a
special power supply is used. See the note on page 20.)
• Management Engine (ME)
System Health Monitoring
• Onboard voltage monitoring for +1.8V, +3.3V, +5V, +12V, +3.3V standby, +5V standby, VBAT, CPU Core, memory, PCH
temperature, system temperature, and memory temperature
• CPU 4+1 phase switching voltage regulator
• CPU thermal trip support
• Status monitor for on/off control
• CPU Thermal Design Power (TDP) support of up to 140W (See Note 1 on next page.)
Fan Control
• Eight 4-pin fan headers
• Fan status monitoring via IPMI
• Multi-speed fan control via onboard BMC
System Management
• Trusted Platform Module (TPM) 2.0
• PECI (Platform Environment Control Interface)/ TSI 2.0 support
• SuperDoctor® 5, Watch Dog, Non-maskable interrupt (NMI), RoHS
• IPMIView, SMCIPMITOOL, IPMICFG
• Chassis intrusion header and detection (Note: Please connect a cable from the Chassis Intrusion header at JL1 to the
chassis to receive an alert via IPMI.)
LED Indicators
• CPU/Overheating
• Power/Suspend-state indicator
• Fan failure
• UID/remote UID
• HDD activity
• LAN activity
Dimensions
• 12.07" (L) x 10.15" (W) (306.58 mm x 257.81 mm)