Supermicro X11DPL-i User Manual

6
2.3 Processor and Heatsink Installation ....................................................................................24
Intel Xeon Scalable-SP and 2nd Gen Intel Xeon Scalable-SP Processors .....................24
Overview of the Processor Socket Assembly ...................................................................25
Overview of the Processor Heatsink Module (PHM) ........................................................26
Preparing the CPU Socket for Installation ........................................................................27
Removing the Dust Cover from the CPU Socket .............................................................27
Attaching the Processor to the CPU/Heatsink Carrier ......................................................28
Attaching the CPU/Carrier Assembly to the Passive Heatsink to Form the Processor
Heatsink Module (PHM) ....................................................................................................29
Installing the Processor Heatsink Module (PHM) ............................................................30
Removing the Processor Heatsink Module (PHM) ...........................................................31
2.4 Memory Support and Installation .......................................................................................32
Memory Support ................................................................................................................32
General Memory Population Requirements ......................................................................32
DDR4 Memory Support for Intel Xeon Scalable-SP Processors ......................................33
DDR4 Memory Support for 2nd Gen Intel Xeon Scalable-SP Processors .......................33
DIMM Population Guidelines for Optimal Performance ....................................................34
DIMM Population Table .....................................................................................................35
DIMM Installation ..............................................................................................................36
DIMM Module Removal .....................................................................................................36
2.5 Rear I/O Ports ....................................................................................................................37
2.6 Front Control Panel ............................................................................................................41
2.7 Connectors ..........................................................................................................................46
Power Connector ..............................................................................................................46
Headers .............................................................................................................................48
2.8 Jumper Settings .................................................................................................................55
How Jumpers Work ...........................................................................................................55
2.9 LED Indicators ....................................................................................................................58
2.10 PCI-E 3.0 Slots .................................................................................................................61
X11DPL-i User's Manual

Supermicro X11DPL-i Specifications

General

USB 2.0 ports quantity	4
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	3
Supported DIMM module capacities	64GB, 128MB
Memory voltage	1.2 V
Supported memory types	DDR4-SDRAM
Maximum internal memory	128 GB
Supported memory clock speeds	2133, 2400, 2666 MHz
RAID levels	0, 1, 5, 10
Wi-Fi	No
Ethernet LAN	Yes
Ethernet interface type	Gigabit Ethernet
System bus rate	10.4 GT/s
Processor manufacturer	Intel
Processor thermal power (max)	140 W
PCI Express x16 (Gen 3.x) slots	2
BIOS type	UEFI AMI
Motherboard chipset	Intel® C621
Motherboard form factor	ATX
Harmonized System (HS) code	84733020

Weight and Dimensions

Depth	257.8 mm
Width	306.7 mm