X11DPL-i User's Manual
88
Port 60/64 Emulation
Select Enabled for legacy I/O support for USB devices such as mice and keyboards. The
options are Enabled and disabled. Default setting is Enabled.
PCIe PLL SSC
Select Enable for PCH PCIe Spread Spectrum Clocking support, which will allow the BIOS
to monitor and attempt to reduce the level of Electromagnetic Interference caused by the
components whenever needed. The options are Disable and Enable.
Server ME (Management Engine) Conguration
This feature displays the following system ME conguration settings.
• General ME Conguration
• Oper. Firmware Version
• Backup Firmware Version
• Recovery Firmware Version
• ME Firmware Status #1
• ME Firmware Status #2
• Current State
• Error Code
PCH SATA Conguration
When this submenu is selected, the AMI BIOS automatically detects the presence of the
SATA devices that are supported by the Intel PCH chip and displays the following features:
SATA Controller
This feature enables or disables the onboard SATA controller supported by the Intel PCH
chip. The options are Disable and Enable.
To Next Page
Loading...
