EasyManuals Logo

Supermicro X9DRW-iF User Manual

Supermicro X9DRW-iF
113 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
Preface
This manual is written for system integrators, PC technicians and
knowledgeable PC users. It provides information for the installation and use of the
X9DRW-3F/X9DRW-iF motherboard.
About This Motherboard
The Super X9DRW-3F/X9DRW-iF motherboard supports dual Intel E5-2600(v2)
Series Processors (Socket R LGA 2011) and Intel QPI (QuickPath Interface) Tech-
nology (V.1.1), providing point-to-point connections with transfer speeds of up to 8.0
TG/s. With the Intel PCH C606/C602 chipset built in, the X9DRW-3F/X9DRW-iF
motherboard supports Intel
®
Intelligent Power Node Manager (IPNM), Management
Engine (ME), Digital Media Interface (DMI), PCI-E Gen. 3.0, and up to 1866 MHz
DDR3 memory. These features greatly enhance system performance for 1U/2U
servers. This motherboard is ideal for high-end server platforms. Please refer to our
Website (http://www.supermicro.com) for processor and memory support updates.
Manual Organization
Chapter 1 describes the features, specications and performance of the mother-
board. It also provides detailed information about the Intel PCH C606/C602 chipset.
Chapter 2 provides hardware installation instructions. Read this chapter when in-
stalling the processor, memory modules, and other hardware components into the
system. If you encounter any problems, see Chapter 3, which describes trouble-
shooting procedures for video, memory, and system setup stored in the CMOS.
Chapter 4 includes an introduction to the BIOS, and provides detailed information
on how to congure the CMOS Setup settings.
Appendix A provides BIOS Error Beep Codes.
Appendix B lists software installation instructions.
Preface
iii

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Supermicro X9DRW-iF and is the answer not in the manual?

Supermicro X9DRW-iF Specifications

General IconGeneral
PS/2 ports quantity0
IPMI LAN (RJ-45) portYes
USB 2.0 ports quantity4
Ethernet LAN (RJ-45) ports2
PCI Express slots version3.0
Memory voltage1.35, 1.5 V
Memory channelsDual-channel
Maximum RDIMM memory512 GB
Supported memory typesDDR3-SDRAM
Supported memory clock speeds800, 1066, 1333, 1600 MHz
Maximum UDIMM memory128 GB
Number of DIMM slots16
Supported RDIMM module capacity16GB, 1GB, 2GB, 32GB, 4GB, 8GB
Supported UDIMM module capacity1GB, 2GB, 4GB, 8GB
BIOS typeAMI
ACPI version4.0
BIOS memory size128 Mbit
RAID levels0, 1, 5, 10
Supported storage drive interfacesSATA II, SATA III
Wi-FiNo
LAN controllerIntel® I350
Ethernet interface typeGigabit Ethernet
On-board graphics card modelMatrox G200
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)10 - 35 °C
Storage relative humidity (H-H)5 - 95 %
Operating relative humidity (H-H)8 - 90 %
Supported QPI8 GT/s
Processor socketLGA 2011 (Socket R)
Intel Xeon seriesE5-2600
Processor manufacturerIntel
Processor thermal power (max)135 W
Processor number of cores supported6, 8
Component forServer
Motherboard chipsetIntel® C602
Sustainability certificatesRoHS
Weight and Dimensions IconWeight and Dimensions
Depth330 mm
Width305 mm

Related product manuals