EasyManuals Logo

Supermicro X9DRW-iF User Manual

Supermicro X9DRW-iF
113 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #93 background imageLoading...
Page #93 background image
Chapter 4: AMI BIOS
4-17
SerialPort2Conguration
Serial Port
Select Enabled to enable a serial port specied by the user. The options are En-
abled and Disabled.
Device Settings
This item displays the settings of Serial Port 2.
Change Settings
This option species the base I/O port address and the Interrupt Request address
of Serial Port 1 and Serial Port 2. The options for Serial Port 2 are: Auto, IO=2F8h;
IRQ=3; IO=3F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12; IO=2F8h; IRQ=3, 4, 5, 6, 7, 9,
10, 11, 12; IO=3E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12; and IO=2E8h; IRQ=3, 4, 5,
6, 7, 9, 10, 11, 12.
Serial Port 2 Attribute
Use this feature to select the attribute for serial port 2. The options are SOL (Serial
On LAN), and COM.
Serial Port Console Redirection
•COM 1 and SOL/COM 2
These two submenus allow the user to congure the following Console Redirection
settings for a COM Port selected by the user.
Console Redirection
Select Enabled to use a COM Port selected by the user for Console Redirection.
The options are Enabled and Disabled. The default setting for COM1 is Disabled,
and for COM2 is Enabled.
Console Redirection Settings
This feature allows the user to specify how the host computer will exchange data
with the client computer, which is the remote computer used by the user.
Terminal Type
This feature allows the user to select the target terminal emulation type for Con-
sole Redirection. Select VT100 to use the ASCII Character set. Select VT100+ to
add color and function key support. Select ANSI to use the Extended ASCII Char-
acter Set. Select VT-UTF8 to use UTF8 encoding to map Unicode characters
into one or more bytes. The options are ANSI, VT100, VT100+, and VT-UTF8.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Supermicro X9DRW-iF and is the answer not in the manual?

Supermicro X9DRW-iF Specifications

General IconGeneral
PS/2 ports quantity0
IPMI LAN (RJ-45) portYes
USB 2.0 ports quantity4
Ethernet LAN (RJ-45) ports2
PCI Express slots version3.0
Memory voltage1.35, 1.5 V
Memory channelsDual-channel
Maximum RDIMM memory512 GB
Supported memory typesDDR3-SDRAM
Supported memory clock speeds800, 1066, 1333, 1600 MHz
Maximum UDIMM memory128 GB
Number of DIMM slots16
Supported RDIMM module capacity16GB, 1GB, 2GB, 32GB, 4GB, 8GB
Supported UDIMM module capacity1GB, 2GB, 4GB, 8GB
BIOS typeAMI
ACPI version4.0
BIOS memory size128 Mbit
RAID levels0, 1, 5, 10
Supported storage drive interfacesSATA II, SATA III
Wi-FiNo
LAN controllerIntel® I350
Ethernet interface typeGigabit Ethernet
On-board graphics card modelMatrox G200
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)10 - 35 °C
Storage relative humidity (H-H)5 - 95 %
Operating relative humidity (H-H)8 - 90 %
Supported QPI8 GT/s
Processor socketLGA 2011 (Socket R)
Intel Xeon seriesE5-2600
Processor manufacturerIntel
Processor thermal power (max)135 W
Processor number of cores supported6, 8
Component forServer
Motherboard chipsetIntel® C602
Sustainability certificatesRoHS
Weight and Dimensions IconWeight and Dimensions
Depth330 mm
Width305 mm

Related product manuals