Chapter 4: AMI BIOS
4-19
Latency
Use this item to set the C6/C7 long latency time value. Valid range
is 0-1023. The default setting is 148.
Thermal Monitor
Use this feature to enable the thermal monitor support. The options
are Disabled and Enabled.
Timed MWAIT
Use this feature to enable the Timed MWAIT support. The options
are Disabled and Enabled.
Custom P-state Table
Energy Performance Gain
Use this feature to enable or disable the energy performance gain.
The options are Disabled and Enabled.
EPG DIMM Idd3N
This feature displays the memory standby current.
EPG DIMM Idd3P
This item displays the active power-down current.
CPU Lock Configuration
CFG Lock
When Enabled, this item allows for the conguration of the MSR
0xE2[15] CFG lock bit. The options are Disabled and Enabled.
Overclocking Lock
Select Enabled to prevent the CPU overclocking. The options are
Disabled and Enabled.
To Next Page
Loading...
Need help?
General
