4-44
Supermicro C7Z170-M/C7H170-M Motherboard User’s Manual
Legacy OS Redirection Resolution
Use this item to select the number of rows and columns used in Console
Redirection for legacy OS support. The options are 80x24 and 80x25.
Putty KeyPad
This feature selects the settings for function keys and the key pad
for Putty, which is a terminal emulator designed for the Windows OS.
The options are VT100, LINUX, XTERMR6, SCO, ESCN, and VT400.
Redirection After BIOS POST
Use this feature to enable or disable legacy Console Redirection after
BIOS POST. When the option-BootLoader is selected, legacy Console
Redirection is disabled before booting the OS. When the option- Always
Enable is selected, legacy Console Redirection remains enabled upon
OS bootup. The options are Always Enable and BootLoader.
Legacy Console Redirection
Legacy Console Redirection Settings
Legacy Serial Redirection Port
Select a COM port for Legacy Serial Redirection. The options are
dependent on the available COM ports.
Serial Port for Out-of-Band Management/Windows Emergency
Management Services (EMS)
The submenu allows the user to congure Console Redirection settings
to support Out-of-Band Serial Port management.
Console Redirection
Select Enabled to use a COM port selected by the user for EMS Console
Redirection. The default is Unchecked (Disabled).
*If the item above is set to Enabled, the following items will become
available for user conguration:
Console Redirection Settings
Out-of-Band Mgmt Port
The feature selects a serial port in a client server to be used by the
Windows Emergency Management Services (EMS) to communicate
To Next Page
Loading...
Need help?
General
