Chapter 4: AMI BIOS
4-57
a SATA disk drive without shutting down the system. The options are
Disabled and Enabled.
Congured as eSATA
This item displays the eSATA status for the detected hard drive.
Spin Up Device
When this option is disabled, all drives will spin up at boot. When this
option is enabled, it will perform Staggered Spin Up on any drive this
option is activated. The options are Disabled and Enabled.
SATA Device Type
Use this feature to identify the type of HDD that is connected to the
STATA port. The options are Hard Disk Drive and Solid State Drive.
PCH FW Configuration
The following information for the PCH Firmware is displayed.
• ME Firmware Version
• ME Firmware Mode
• ME Firmware SKU
ME FW Image Re-Flash
This item will update the PCH Firmware from an image in a USB Flash-
drive attached to a USB port. The options are Disabled and Enabled.
To Next Page
Loading...
Need help?
General
