CPU2
Battery
A
2-9 Onboard LED Indicators
A. LAN1/2 LEDs
B. Onboard PWR
LED
B
A
Onboard Power LED
An Onboard Power LED is located at LE2
on the motherboard. When this LED is on,
the system is on. Be sure to turn off the
system and unplug the power cord before
removing or installing components. See
the table on the right for more information.
Onboard PWR LED Indicator (LE1)
LED Settings
LED Color Status
Off System Off (PWR cable
not connected)
Green System On
Green:
Flashing
Quickly
ACPI S1 State
GLAN LEDs
Two LAN ports (LAN 1/LAN 2) are located
on the IO Backplane of the motherboard.
Each Ethernet LAN port has two LEDs.
The yellow LED indicates activity, while
the other Link LED may be green, amber
or off to indicate the speed of the connec-
tions. See the tables on the right for more
information.
LAN 1/LAN 2 Link LED (Left)
LED State
LED Color Denition
Off 10 Mbps, 100 Mbps, or No
Connection
Green 10 Gbps
Amber 1 Gbps
Rear View (when facing the
rear side of the chassis)
Activity LED
Link LED
A
GLAN Ports 1/2 Link Indicator
LED Settings
LED Color Denition
Off No Connection/10 Mbps
Amber 1 Gbps
Green 100 Mbps
GLAN 1/2 Activity Indicator
LED Settings
Color Status Denition
Yellow Flashing Active