Supero X10DAi - DIMM Information

4-16
X10DAi/X10DAC/X10DAX Motherboard User’s Manual
EHCI2
Select Enabled to enable EHCI (Enhanced Host Controller Interface) support on
USB 2.0 connector #2 (-at least one USB 2.0 connector should be enabled for EHCI
support.) The options are Disabled and Enabled.
Azalia
Select Enabled to enable onboard Azalia audio devices. Select Auto for the BOIS
to automatically enable Azalia support when an onboard Azalia device is detected.
The settings are Auto, Enabled, and Disabled.
Azalia PME Enable
Select Enabled to enable PME (Power Management Event) support for Azalia.
The settings are Enabled and Disabled.