Chapter 4: AMI BIOS
4-43
Save As User Defaults
To set this feature, select Save as User Defaults from the Exit menu and press <En-
ter>. This enables the user to save any changes to the BIOS setup for future use.
Restore User Defaults
To set this feature, select Restore User Defaults from the Exit menu and press <En-
ter>. Use this feature to retrieve user-dened settings that were saved previously.
Boot Override
This feature allows the user to override the Boot Option Priorities sequence in the
Boot menu, and immediately boot the system with another device specied by the
user. This is a one-time override.
To Next Page
Loading...
Need help?
General
