SUPMEA SUP-LDG User Manual

Chapter 6 Operation
www.supmea.com
-39-
correction
coefficient 4
Flow rate modified point 4, when The flow rate function is disabled, this
parameter does not display.
2- Current output
No.
Type
Option
Password
level
Parameter
range
Default
2-0
Reverse
output
permission
Option
User
Y
，
N
N
When flow direction is reverse, whether 4-20 ma output is needed,
pulse/frequency; cannot be disabled at positive flow.
2-1
Adjust K
Figure
User
0-99999
1.000
Used for adjusting the output current value, I = Kx + B
2-2
Adjust B
Figure
User
0-99999
0.000
Used for adjusting the output current value, I = Kx + B
2-3
Output
current
Display
User
4.00-20.00
--
Display the current value(mA) of the current output
3 - Pulse/frequency/alarm output
3-0
Pulse output
type
Option
User
Frequency,
pulse, alarm
Frequency
Frequency ,pulse equivalent/alarm output optional
3-1
Transistor
state
Option
User
High/low
level
High level
Select the level state of no frequency output, no pulse equivalent output,
no alarm output
3-2
Max.
frequency
Figure
User
0-5000
2000
Set the corresponding frequency of the real-time flow upper limit ; When
selecting frequency output, this parameter displays.
3-3
Pulse value
（
L/P)
Option
User
0.001-999.99
9
1.0
Set the cumulant that each pulse stands for ;

SUPMEA SUP-LDG Specifications

General

Brand	SUPMEA
Model	SUP-LDG
Category	Measuring Instruments
Language	English