Supmeter BST100-E81 - Static Span Calibration with Chain Weight

37
6.4.3 Static Span Calibration with Chain Weight
Keep the belt weigher running with loading a chain weight for correcting Span Coefficient.
Put a measured chain weight as a continuous and steady load on the belt weigher and then start the
belt weigher.
05[R]
R: 1-99
P110 Cal. Revs
Main Display Interface
【MENU】+【▲】【 ▼】: F2 Calibration
【ENT】+【▲】【 ▼】：3 Span Cal.Stat1
【ENT】
M
【ENT】
R: 0.1-1000.0
P111 ChainWeight
010.0[kg/m]
【MENU】: Exit 【ENT】: Save
【ENT】
M
NewSpan: 200320
E%: -0.16%
2 Span Cal. Dyn.
OldSpan: 200000
E% = (Display Weight – Input Weight) /
Input Weight × 100%