46
6.6 F4 Data Clearing
Data Clearing Mode Description:
Manual Clearing Mode
1 Clear Screen: Clear Totalized Weight and Totalized Weight Pulse Count. But Totalized Weight of Current
Shift will not be cleared, so this operation has no effect on recording of weight per shift.
2 Clear Weight: Clear Totalized Weight, Totalized Weight Pulse Count and Totalized Weight of Current
Shift. The cleared value of Totalized Weight of Current Shift will not be recorded.
3 Clear Records: Clear History Records of Totalized Weight. But Current Totalized Weight, Totalized
Weight Pulse Count and Totalized Weight of Current Shift will not be cleared.
Timing Auto Clearing Mode
The parameter ‘[P606] Auto-clear’ can be set to ‘0: OFF / 1: Per Shift / 2: Per Day / 3: Per Month’, and its
default value is ‘0: OFF’.
‘Timing Auto Clearing’ has no effect on recording of weight per shift.
[P606]=‘1: Per Shift’: After recording Totalized Weight per Shift, do operation ‘Clear Screen’ automatically.
[P606]=‘2: Per Day’: After recording Totalized Weight of the last Shift per Day, do operation ‘Clear Screen’
automatically.
[P606]=‘3: Per Month’: After recording Totalized Weight of the last Shift per Month, do operation ‘Clear
Screen’ automatically.
Auto Clearing Before Overflowing Mode
When Totalized Weight value reaches to the maximum value 2×10
9
[Scale Unit], do operation ‘Clear Screen’
automatically.
‘Auto-clear Before Overflowing’ has no effect on recording of weight per shift.
YES NO
To Next Page
Loading...
Need help?
General
