Supmeter BST100-E81 - Segmenting Span Correction

41
6.4.5 Segmenting Span Correction
After doing Dynamic or Static Span Calibration, further corrections for 3 [AD Value: 0~60000] linear
segments are optional for correcting Correction Coefficient 1~3.
【ENT】& Start loading
Remainder length of a revolution
AD: 26080
01R 9.90m
5 Span Cor. Seg.
W: 1.0kg
Revolution Count
【▲】【 ▼】:
Display Flow, Load or AD Value
0: SEG1
R: 0-2
Linear Segment
AD Value Linear Segment 1~3
SEG1: 0~[P119]
SEG2: [P119]~[P120]
SEG3: [P120]~Max. AD Value
AD: 26080
Wait… 1.00m
5 Span Cor. Seg.
W: 245.0kg
Stop loading &【ENT】
After running the last revolution:
Main Display Interface
【MENU】+【▲】【 ▼】: F2 Calibration
【ENT】+【▲】【 ▼】：5 Span Cor. Seg.
【ENT】
M
End 5R
[ENT]: Input…
5 Span Cor. Seg.
W: 249.5kg