suprema FaceStation 2 - Device Info; Memory Info; USB Memory; Restart Device

Device
23
• Time Sync: Synchronize the server and the time. If you wish to synchronize the server and the time, enable Time Sync.
• Date Format: Set the date format. You can select among YYYY/MM/DD, MM/DD/YYYY and DD/MM/YYYY.
• Time Format: Set the time format. You can select either 24-Hour or AM/PM.
Device Info
You can view the model name, firmware version of Device ID, and MAC address.
1 Press and authenticate with the Admin level credential.
2 Press DEVICE > Device Info.
3 You can view the information including Model Name, Device ID, HW, FW, Kernel, MAC, and WiFi MAC.
Memory Info
View the status of memory usage.
1 Press and authenticate with the Admin level credential.
2 Press DEVICE > Memory Info.
USB Memory
Connect USB Memory and import user information to the device or export log and user information from the device. Upgrade the firmware.
1 Press and authenticate with the Admin level credential.
2 Press DEVICE > USB Memory.
3 Select the desired item and change the setting.
• Import: Import user information from the connected USB memory.
• Export: Select information you wish to export to the connected USB memory.
• FW Upgrade: Upgrade the firmware if the firmware files are saved in the connected USB memory.
The type of supported USB memory is as follows. If you use a different type of USB memory, the function may not operate normally.
• Samsung Electronics: SUM-LSB 8GB, SUM-PSB 8GB, SUM-PSB 16GB, SUM-BSG 32GB
• LG Electronics: XTICK J3 WINDY 8GB, SMART USB MU1 White 8GB, MU 1 USB 32GB, MU28GBC 32GB, XTICK MOBY J1 16GB
• SanDisk: Cruzer 16GB, Cruzer Blade CZ50 4GB, Cruzer Blade CZ50 32GB, CZ48 Ultra USB 3.0 64GB, CZ80 USB3.0 64GB, CZ52 64GB, Cruzer Glide Z60
128GB, Cruzer Force CZ71 32GB
• Sony: Micro Vault Click 8GB, MicroVault CLICK 16GB, USM-SA1 32GB
• Transcend: JetFlash 760 8GB, JetFlash 760 32GB, JetFlash 500 8GB
• Memorette: MINI500 8GB
• A-DATA: S102 PRO 8GB
• Trigem Pastel 8GB
Restart Device
The user can restart the device.
1 Press and authenticate with the Admin level credential.
2 Press DEVICE > Restart Device.
3 To restart the device, press OK. To cancel, press Cancel.
Restore Default
Device settings, network settings, and operator levels will be reset.
1 Press and authenticate with the Admin level credential.
2 Press DEVICE > Restore Default.
Note