Device
24
3 To reset all device settings, select All settings and press OK. To reset all settings except for network settings, select Keep Network
Settings and press OK.
• When you reset, the operator level will be reset as well. After resetting, make sure to set the operator level again.
• Language setting will not change after resetting.
Factory Default
Delete all the information saved in the device and the root certificate and restore default settings.
1 Press and authenticate with the Admin level credential.
2 Press DEVICE > Factory Default.
3 To reset, press OK.
• Factory Default menu can be used when the root certificate is saved in the device.
Delete the Root Certificate
Delete the root certificate saved in the device.
1 Press and authenticate with the Admin level credential.
2 Press DEVICE > Delete the Root Certificate.
3 To delete the Root Certificate, press OK.
• Delete the Root Certificate menu can be used only when the root certificate is saved in the device and Administrator has been designated.
To Next Page
Loading...
