22
SetupUserList = 555-555-5555
Phone used(888-888-8888) & sending the command = sutronReboot
Response from GPRS modem = invalid authorization
Phone used(555-555-5555) & sending the command = sutronReboot
Response from GPRS modem = command processed and system rebooted
SMS command processing
If the user wants to change the setup in the GPRS settings or gather status information
about the Xpert from the GPRS modem he or she can use their phone to do it. The
following commands are supported via SMS:
Call home (shoulder tap): connect to SSP/CL
STAP [url[:port]]
Call home with optional IP/Port: connect to redirector port specified
REDIR [url[:port]]
To set (or show if a setting isn't provided) the PrimaryIP, SecondaryIP,
MessagePort, CommandPort, RedirectPort. The URL and PORT values are user
input
SETPIP [url]
SETSIP [url]
SETMP [port]
SETCP [port]
SETRP [port]
Check power status, or turn power temporarily on or off until the next power
cycle:
POWER [ON|OFF]
Command-line commands
Any responses that are generated as a result of the command shall be sent via
SMS to the original sender. The responses shall be limited in length by the max
SMS message length.
Also if the SetupPassword, and/or DataPassword are enabled, the user must type
the authcode string before the command in order for authorization of the
command to happen.
An example:
SetupPassword : sutron
On the phone send a text message to phone number of the GPRS modem with the
command “Reboot” and the authentication code like this:
sutron reboot
To Next Page
Loading...
