Sutron 9210 - Testing GPRS Operations; GPRS Diagnostics Tab

28
TESTING GPRS OPERATIONS
This section describes how the GPRS Diagnostics Tab may be used to test out GPRS
communications.
The GPRS Diagnostics Tab
The GPRS Diagnostics Tab may be used to test communications over GPRS, and
examine the communication status.
Figure 16: GPRS Diagnostics Tab
Modem status
Modem status describes the current state of GPRS processing, and may be any one of the
values in the following table:
Status
Description
Alarm Tx
Alarm transmission in progress
App Stop
System is being shutdown
Comm Error!
An error has occurred talking to modem (check connection to modem)
DailyMaint
System is storing and resetting daily counts
Disabled-Off
GPRS is disabled and off
Disabled-On
GPRS is disabled, but power is still on
Force Power Off
The “OFF” button was pressed in the GPRS Diagnostics Dialog
Force Power On
The “ON” button was pressed in the GPRS Diagnostics Dialog
GPRS Denied
A connection to the GPRS network could not be made
GPRS Ignore
A GPRS connection could not be established, and the Xpert is moving