You can store up to 100 POIs in the watch. Note that also routes
take up this quota. For example, if you have a route with 60
waypoints, you can additionally store 40 POIs in the watch.
You can select a POI type (icon) and POI name from a pre-defined
list, or freely name the POIs in Movescount.
To save a location as a POI:
1. Press [Start Stop] to enter the start menu.
2.
Scroll to NAVIGATION using [Start Stop] and enter with [Next].
3.
Press [Next] to select Location.
4.
Select CURRENT or DEFINE to manually change longitude and
latitude values.
5. Press [Start Stop] to save the location.
6. Select a suitable POI type for the location. Scroll through the POI
types with [Start Stop] or [Light Lock]. Select a POI type with
[Next].
7. Select a suitable name for the location. Scroll through the name
options with [Start Stop] or [Light Lock]. Select a name with
[Next].
8. Press [Start Stop] to save the POI.
38
To Next Page
Loading...
