Suunto AMBIT2 2.0 - Putting on Heart Rate Belt

•
Check that you are wearing the heart rate belt correctly (see
11.4 Putting on heart rate belt ).
•
Check that the electrode areas of the heart rate belt are moist.
•
Replace the battery of the heart rate belt, if problems persist.
•
Re-pair your heart rate belt with the device (see 16 Pairing
PODheart rate belt ).
•
Machine-wash the textile strap of the heart rate belt regularly.
11.4 Putting on heart rate belt
NOTE: Suunto Ambit2 is compatible with Suunto ANT Comfort
Belt.
Adjust the strap length so that the heart rate belt is tight but still
comfortable. Moisten the contact areas with water or gel and put
on the heart rate belt. Ensure the heart rate belt is centered on
your chest and the red arrow is pointing up.
78