NOTE: If your Suunto D5 runs out of battery when in deep sleep, you can only wake up
your device by connecting to a charger or a computer with a USB cable of 5Vdc.
3.20. Language and unit system
You can change the device language and unit system at any time. Suunto D5 refreshes
immediately to
reflect the changes.
To set these values, see 4.3. How to set language and unit.
3.21. Logbook
Dive logs can be found under Logs. By default, they are listed by date and time, and each
entry listing shows the max. depth and dive time of the log.
Dive log details and profile can be browsed by scrolling through the log with upper or lower
button and selecting it with the middle button.
Each dive log contains data samples with fixed 10-second intervals. Freedive sample rate is 1
second.
For more detailed log analyses, upload the dive(s) to Suunto DM5 (see 3.27. Suunto DM5) and
the Suunto app (3.26. Suunto app).
In the image below you can see information on the:
•
start and stop times (14:36, 15:11)
•
depth
profile
•
surface time (0:07)
•
max depth and temperature at max depth (33.0 m, 19 °C)
As an example, the logbook info display gives you the following information on your logged
Nitrox dive:
Suunto D5
34
To Next Page
Loading...
